It’s common for audiophiles to listen to music in their cars because it allows them to use their free time in a more productive manner when traveling about town.
What if you don’t want to spend the money on a new speaker system but yet want your car speakers to sound better and louder?
There’s nothing to be concerned about!
Speakersmaster is here to assist you get a great deal on a high-quality audio system for your long-distance driving.
In addition to obtaining a nice set of car speakers, we’ll share some pointers for making your music sound better and louder. First and foremost, you’ll need to decide on your ideal scenario for your vehicle’s audio system.
If you’re concerned that your car speakers aren’t producing enough volume to fill your cabin to the brim, there are a number of ways to improve their output. For those who already possess a big volume that can easily be dispersed from their cabins, this is not a good idea.
In addition to causing an explosion within your car, this is a source of noise pollution that could have a negative impact on the environment. Decide what you really want and need.
Ask a local but experienced and expert car audio installer for honest advise on what gear you should acquire and why for this matter.
Due to the fact that we don’t know what kind of automobile you have, how big the cabin is, how many hours you spend in your vehicle, etc. Avoid ambiguity in these matters.
But for now, we’re going to give you some pointers on how to obtain the best sound possible from your car’s audio system.
In order to increase the volume of your car speakers, here are some tips.
Custom car audio systems allow you to keep experimenting with ways to increase the sound quality of your listening experience after you’ve already changed your factory sound system.
The first step is to determine if the speaker you’re looking to purchase is the right one for your needs. Because of the wide variety of speakers available today, including the well-known 2-way and 3-way varieties.
And how can you make your speakers louder if you don’t know what you’re doing with them? Make use of both two-way and three-way speakers.
1.Use Gaskets Tape
You may not realize how much of an impact this little device can have on your car’s audio system.
“You are surely mistaken,” if you’re asking yourself why you’re getting this pointless and inexpensive hack.
Installation and mounting issues may be to blame if you aren’t receiving a good quality and powerful sound.
You now have the option of first having it uninstalled and then having it correctly installed. Do you understand what I’m saying?
It’s obvious that you won’t see much of a change, but it will be more stressful for you. A car audio gasket tape can be used instead.
This gasket tape will stabilize the speaker installation while isolating the speakers from vibrations. Installing this tape on your speaker’s ring requires peeling back the adhesive layer from a piece of foam tape with a wrap on one side.
As a result, you’ve effectively separated your speakers’ front and rear waves, as well as substantially reduced air leaking between them. As a result, you won’t experience any distortion when listening to music while driving, which has a favorable effect on volume.
The fact that this gasket is specifically designed for car audios and is a cost-effective solution makes me certain that it will help in the vast majority of cases.”
2.Figuring the Polarity
Now, if the gasket approach doesn’t work, figuring out the best polarity should be a viable alternative. Your speaker has a pair of positive and a negative leads, and all speakers work on polarity.
Connect the positive terminal of your amplifier to the positive terminal of your head unit for this step
It’s possible that your amplifier or head unit’s opposite (or) reverse has been wired to the opposite (or) reverse of the speakers you’ve installed, resulting in a minimal output currently.
Depending on the number of speakers, an enormous amount of sound quality will be ruined if the polarity is incorrect. To verify this, all you have to do is locate the speakers’ labeled terminals on your amplifier/head unit.
It’s great if they’re parallel, but if they’re not, you’ll want to double-check.
However, if it doesn’t, double-check the connections. The easiest way to identify the correct terminal is to link your clock battery and your terminals together.
If your speaker’s positive terminal that you are touching to your positive battery terminal is truly the positive, then your speaker is working.
As a techie, you can perform this check yourself. To do this on your own, you’ll need to have some knowledge of the subject matter. Do not employ this tactic if you’re dealing with someone who is very vulnerable.
You can also use a polarity test tool to verify what you’ve done.
3.Tune Your Sound Control
If your speakers are fine and there are no technical concerns, this option is for you. You may calibrate your stock or aftermarket head unit by tweaking it.
Use your sound controller’s balance and fading controls to improve your sound. Changing the speaker closest to you, most likely the one in the driver’s seat, is all it takes to reorient your stereo’s central sound image.
Assuming you have numerous speakers in your automobile, which is the best situation, then you can simply transfer your sound backstage inside your cabin to your preferred side.
To make your speakers sound as loud as possible, simply set the fade in the middle. If you’re an audiophile, you can adjust the sound in the front seats.
4.Get Rid Of All Clunking
Having a lot of clutter in your center console, dashboard, and doors does not make you think that your sound is being obstructed.
Your storage compartments may be full of hard and odd items that keep bumping into each other as you accelerate the car.
Speakers that are less than 90dB sensitive can use this feature. If you’ve installed aftermarket automobile speakers, you’ll find this information on the speaker’s box or on the speakers themselves.
Sound-deadening materials are used in the automotive audio system to reduce the volume and quality of the sound. The distortion and muddiness are absorbed by these materials.
Believe me, this could be the greatest and most pressing issue you’ve never ever contemplated when you push your car to the limit. Another thing to remember is to keep the screws near to the speaker grill tightened at all times. Speakers that have loose cabling might produce a much inferior sound quality.
5.Better/Wrong Music Selection
Most of us are too busy and time-conscious to download music videos from YouTube and convert them to MP3 files for playback in our cars. It’s one of the most basic and straightforward issues that most of us face.
A small amount of the file’s quality is sacrificed during the uploading process so that it can be used by other artists.
Whenever you listen to music on YouTube and then download it via a converter, it loses quality again, resulting in low-quality audio files.
You won’t notice any distortion when you listen to the file on your phone because you’re playing it at a low medium and volume level.
However, when you listen to it through your speakers, that compressed file will not sound very well or loud.
Audiophiles don’t recommend using YouTube to play music on your car stereo because it was never intended for that purpose.
Your car’s audio system will benefit from a subscription to an audio service like Apple Music or Spotify.
Select the highest quality instead of automatic quality when transferring those audio files to your device. The best audio files to play are those with 320 kilobytes per second or FLAC files.
However, this will eat up a lot of time and data, but it will save your speakers at the same time.
6.Using The Best Volume
Having figured this out, you can immediately begin to enhance this area. If you’re playing music from your phone, turn up the volume all the way if you’re using it as an input device or as a source of music.
It’s only for the purpose of enhancing the sound quality and volume, but it’s still a horrible habit to get into.
Sound distortion occurs in most speakers as a result of internal vibration, which degrades their quality. If you’re using a weak amplifier, this could also damage your speakers.
If you can overcome this, you may expect a clear and crisp sound with a wonderful volume.
The frequency of your speakers should also be taken into consideration. A frequency rate at which the speakers are most enjoyable to listen to can be found for nearly any speaker, regardless of whether it was installed at the factory or purchased aftermarket.
The loudness and clarity of your speaker will suffer if you surpass this limit, which is not a good practice.
Your speaker’s model name can be entered into Google to acquire all of its technical specifications, if you don’t want to throw away your speaker’s box.
As a rule of thumb, speakers with a frequency range of 50Hz or below tend to be the best for both volume and clarity.
7.Using Gain As Volume
Another common blunder or bad habit is to utilize the gain knob as a volume or bass boost knob, which is completely incorrect. These two knobs, in fact, are completely indistinguishable from one another to them.
It’s obvious that your volume knob controls the volume level of your music, but the gain is a different matter.
This is mostly used to match the amplifier’s distortion level to that of the connected device. Always at different voltages, your device’s signals will lose and distort information.
The amplifier will clip if you turn the gain all the way up because you are not allowing the distortion and voltage of the amp and your device to match. In addition to damaging your amplifier, this bad practice can cause your speaker to explode.
Do not tamper with these settings if you had your audio system fitted by a professional. Audio mechanics utilize specialized equipment to measure distortion levels and then adjust the amplifier power accordingly.
8.Aftermarket Head Unit/Amplifier
Consider purchasing an aftermarket head unit that comes equipped with a built-in amplifier if you prefer not to fiddle with the stock device’s amplifier. This will allow you to increase the volume of your speakers.
If nothing else works, it’s best to replace your head unit totally, which isn’t recommended unless you have a new car with a nice head unit. This is a costly choice.
It’s also possible to acquire a simple amplifier and connect your speakers to that amplifier, regardless of whether you have a new (or old) automobile. It’s a cost-effective solution to boost the power of your speakers.
Sound quality can be affected by the way you put your equipment even if you have high-quality gear, if you study sound engineering.
Your amplifier and speakers will only work properly if you use the proper power cables and electrical components.
In order to avoid driving your automobile with insufficient power, consider upgrading your wiring or adding an extra battery.
Poor sound quality, dimming headlights or indicators, and a ruined battery are all possible outcomes of not using the correct electrical components.
10.Getting Over-Sized Subwoofers
Choosing subwoofers that are too large for your vehicle is a significant audio mistake, especially if you just bought a new car or don’t know what you need in a car.
Because we are in the twenty-first century, you no longer need a lot of expensive, high-tech gear to enjoy superb music.
Gone are the days when a piece of equipment’s size was the sole criterion for determining whether or not it was good.
At least for car audio, this is no longer the case. Smaller subwoofers with adequate airspace can often outperform larger subwoofers in comparison.
You must concentrate on your requirements, such as determining the place at which the sub will be installed.
Inside the vehicle, on the dashboard, or even under the seats, this could be the case (for large vehicles). You’ll need to measure the volume of your car cabin yourself, or you can hire a professional car-audio installer who specializes in this type of work.
It can assist you in making an informed decision on the most cost-effective speaker with a large enough driver.
11.Max Wattage Myth
When it comes to wattage, some beginner audiophiles have a hard time understanding it. They were under the impression that better sound quality was associated with increased wattage. On the other hand, you need to be sure this is true as well.
RMS and peak power are two terms used to describe the wattage of most speakers. Make certain that peak power has almost no bearing on sound quality or volume.
This is the maximum value that the speaker’s manufacturer has been able to test to date. Your speaker is only capable of delivering that much power at its maximum output level. Once you hit that peak wattage, you’re more likely to blow up.
For example, in our guide to the best 6.5-inch vehicle speakers, we included a JBL GX600C from JBL, which has a 400W peak output wattage and an RMS of 140W.
If your speaker’s peak power/wattage is more than this, it runs the risk of exploding from overwhelming.
Speaker cones and other components will fail due to underpowering if your input is less than that RMS (140W) at a lower voltage than that advised. In addition, this can also harm your amplifier’s power supply.
How to increase the volume of your car’s speakers?
You may find some helpful advice in this article on how to improve the sound quality of your car speakers.
Most of these hints don’t necessitate the services of a professional car audio mechanic, therefore they’re free or low-cost. However, depending on your circumstances, you may have to spend some money on certain things.
The top 3.5-inch vehicle speakers and 6X9 components speakers may also be found here.
Let us know what you think in the comments below after reading this guide thoroughly.